Kevlar-carbone front spoiler for the 997 turbo with larger brake ducts.

Improve down force and increase amount of airflow to the front brakes.

Constructed entirely of carbon fiber composites with kevlar reinforcement.

General Fitment

Lower rear diffuser for 997 turbo.

Accelerates the underbody airflow which sucks the car to the ground.

The additional air fins direct the flow of air, reduce turbulence and generate greater down force which stabilizes the car at high speed.

Constructed entirely of carbon fiber with a layer of high temperature insulation.

General Fitment

The Porsche 997 turbo is an incredible machine that can reach unbelievable top speeds in its stock form. taking this car to the track however requires some increased downforce. downforce helps the car in traction by keeping the rear end planted on the ground. modeled after the GT2 rear wing blade, agency power has released this add on wing to work with the stock decklid. not only functional, this rear wing also adds style! the wing blade ends extend out and turn down to knife through the air. the wing blade follows the rear fender lines to give you that more aggressive look.

The high glossy carbon fiber blade is done using a prepreg process with 2x2 carbon sheets. the process means the carbon work is ...(choose a part on the right to read more)

General Fitment

High quality polished lower switch cover. This is a carbon overlay, meant to be adhered to your original plastic lower switch cover. Great detail is taken to attempt to match the original weave size, color and polish. Whether you are adding carbon to the interior or matching existing pieces, this is high quality and is made in Germany so it is made to last, like the original. Sold individually. We also recommend replacing your missing or broken switch cover clips, part # 94455255700. 2 are needed per switch cover. If you would also like to replace your knobs, use part # FVD33399603b8

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please c...(choose a part on the right to read more)

With the insane results of our aluminum y-pipe kit for the Porsche panamera turbo, we wanted to step up the luxury look of the engine bay with a full carbon fiber version. this carbon fiber y-pipe is a full replacement and includes everything you need to install in place of the original.

Looking at the stock y design in front of the throttle body, we new there was improvements to be made. This throttle body is the same size as the Cayenne tt throttle body we use on our 996tt and 997tt upgrade kits. The stock y-pipe is a 2 piece plastic y design that is smooth on the inside with a "deflector" internally to channel air. The bad part about the stock one is it goes from a 78mm id at the throttle body down to...(choose a part on the right to read more)

General Fitment

Continuing on our modification path for the Porsche 997.2 turbo, agency power has just finished and released their new carbon fiber cold air intake kit. the carbon fiber airbox is a direct replacement for the OEM intake box. the airbox is made using a prepreg process which allows the entire airbox to be flawless from pulls. similar in shape to the OEM box for fitment, this carbon fiber unit features enlarged holes to fit dual K&N cone air filters. the 2x2 weave is finished in a gloss clear coat and sits nicely where the standard plastic box once was. These filters are pressed in through the rear of the intake box utilizing the rubber seal on the filter as a secure fit.

Each filter mates up to the factory...(choose a part on the right to read more)

General Fitment

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

Vis racing carbon fiber turbo hood Porsche Cayenne 02-08

Vivid racing has been changing the import seen for the past decade, with their extrodinary performance, styling, and culture of the auto enthusiast. Let them change the scene ones more, with the collaboration of vis racing.

Vis carbon fiber hoods are made from the finest carbon fiber available. Each hood is protected with a uv coating which allows the hood to hold its high gloss finish. All our carbon fiber hoods are grade a and above. Vis carbon fiber hoods have a tight carbon weave, rolled edges, and one piece undersiding. Hood pins are required.

General Fitment

This front lip attaches directly to the o.e. 996 c4s/turbo front bumper and not only gives the car a great look, but better downforce as well!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

Kevlar, with air inlets.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

General Fitment

997 GT3 rear spoiler fits 997turbo includes: deck lid, aluminum upright, 3rd brake light housing and kevlar/carbone wing (l= 145cm, b=28cm, h=7 cm) with end plates. Material: aluminum, fiberglass, kevlar-carbone. Also available with wing blade in fiber (gfk) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may need to be sourced from Germany and would take 2-4 ...(choose a part on the right to read more)

Colgan custom is now offering a two-piece carbon fiber pattern for all Porsches models. These bras also have the snug, custom fit you're looking for and offer unobstructed hood access without removing the bra. Cutouts for license plates, fog lights, etc. Come standard unless otherwise indicated.

Note: this models does not have a front cutout for license plate.

General Fitment

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

Whether you want the rich, warm look of genuine rosewood, burl, or the crisp, modern, high-tech look of carbon fiber, these complete dash and interior kits will transform your interior. These are easily installed by do-it-yourselfers; the thin, flexible material fits perfectly around the contours of your interior, and a specially developed adhesive attaches the trim securely, but without damaging the original material underneath.

Make sure you note which optional holes are used in the shift plate when ordering.

General Fitment

Only for turbo or turbo loook body!

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Complete spoiler inclusive deck lid. Wing profile top side polished carbon. Spoilers grill is not includet.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

Fits: GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-0...(choose a part on the right to read more)

General Fitment

Plastic cover in front must be modyfied around 0,5mm to fit this strut brace.
Made of full carbon.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.6l (05-07), GT3 rs, 4l, 368kw (11-), 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09), GT2 (08-09), turbo (07-09), Carrera 4s, 261kw (05-08), Carrera 4, 239kw (05-08), Carrera s, Carrera, s 3.4, 217 kw (06-08), 2.7, 180 kw (07-08), 3.2, 206 kw (05-06), 176 kw (05-06)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks are designed to be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design
S...(choose a part on the right to read more)

General Fitment

The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2.

The fx350 features only slightly increased pedal pressure, long life disc and positive engagement.

The clutch masters fx350 system:

Heavy-duty street & racing system
Holding capacity 110% over stock
Heavy-duty reinforced pressure plate
Hi-leverage pressure ring design ...(choose a part on the right to read more)

General Fitment

Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

Fits: Carrera 4s, 3.8l, 261kw (05-08), Carrera 4, 3.6l, 239kw (05-08), Carrera s, Carrera, GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-0...(choose a part on the right to read more)

General Fitment

997 GT3 rear spoiler fits all 997 (not turbo) includes: deck lid (grp), aluminum upright, 3rd brake light housing and kevlar/carbon wing (l= 145cm, b=28cm, h=7 cm) with carbon rsr look end plates. Material: aluminum, glass reinforced plastic (grp), kevlar-carbon. Also available with wing blade in fiber (grp) FVD512997gt3rs tech tip: facelift models (2009- ), the 3rd brake light can usually be assumed. If necessary please order the 3rd brake light 99763105201 separately. The holes for the intake fan on the rear deck lid must be drilled prior to installation (model variations). Please note wing is fixed and is not adjustable. The air inlet of the rear is not included. Please order 99751262592g2x

This item may ...(choose a part on the right to read more)

General Fitment

tr!ckstuff ts66 performance racing - red ece-r90 tüv

Our ultimate racing brake pad with carbon is designed for the race conditions up to 6 hrs and it shows its full potential here. It is resistant to fading above 650°c and has an extremely high coefficient of friction. The matrix of the mixture ensures a constant brake performance even in wet weather conditions.

Fits: GT3 cup 3.6l (05-07), GT3 rs, 3.6l, 305kw (07-09), GT3, turbo (07-09), Carrera 4s, 3.8l, 283kw (09-), Carrera 4, 254kw (09-), Carrera s, Carrera, 261kw (05-08), 239kw (05-08), GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT2 (01-05), turbo (01-05)

General Fitment